cisco asr 1006 span

Advertisement

Cisco WAN :: ASR 1006 Router IOS XE Upgrade To 3.4.x?

Cisco WAN :: ASR 1006 Router IOS XE Upgrade To 3.4.x?

We are having Cisco ASR 1006 Router with the XE Code :asr1000rp1_advance entrprisek9.03.01.00.S.150_1.S.bin The basic information we are having is cisco ASR1006 (RP1) processor with 1717513K/6147K bytes of memory. 10 Gigabit Ethernet interfaces 32768
Cisco VPN :: IKEV2 IKEV1 Compatibility With ASR 1006

Cisco VPN :: IKEV2 IKEV1 Compatibility With ASR 1006

If I implement IKE V2 on Cisco ASR 1006 Router or on firewall and sets up IPsec with IKEv1 device ( Cisco Router , Juniper etc )will it work or not ?
Cisco WAN :: ASR 1006 Supported Span Port Or Port Mirroring?

Cisco WAN :: ASR 1006 Supported Span Port Or Port Mirroring?

is ASR 1006 supported span port or port mirroring? Any config about that?
Cisco WAN :: IP DNS Server Configuration In ASR 1006

Cisco WAN :: IP DNS Server Configuration In ASR 1006

I have a ASR 1006 router in my environment and I want to make it a DNS server for some reason. I tried to configure the command IP dns server on the ASR but it does not accept the command. I also have a Cisco 7206 VXR router in my environment which a
Cisco Firewall :: Firewall / Can ASR 1006 Replace ASA 5580

Cisco Firewall :: Firewall / Can ASR 1006 Replace ASA 5580

i check ASR 1006 config with ESP-40, the firewall permonce can reach 40G, ASA 5580 is 20G, can ASR 1006 replace ASA 5580, is there any function feature problem?
Cisco WAN :: ASR 1006 - IRB Feature Is Not Supported

Cisco WAN :: ASR 1006 - IRB Feature Is Not Supported

My problem with ASR 1006 as i tried to use the feature IRB ( integrated routing and bridging ) but i find that this feature is not supported i assume it may be a problem with IOS version or may be i made he configuration not in the proper way so i am
Cisco WAN :: To Enable 5X1GE V2 Modules On ASR 1006

Cisco WAN :: To Enable 5X1GE V2 Modules On ASR 1006

I am facing some issue to activate ,SPA-5X1GE-V2 modules on ASR 1006.
Cisco WAN :: ASR 1006 RP Failover?

Cisco WAN :: ASR 1006 RP Failover?

The active RP of ASR 1006 router automatically switched over to standby while the standby assumed the active role.Not sure the exact reason for this behaviour. The image version is 122-33.XNB1. We noticed an outage when the switchover happened but th
Cisco WAN :: ASR 1006 Not Being Able To Bring Interface Up

Cisco WAN :: ASR 1006 Not Being Able To Bring Interface Up

I have 2 ASR 1006 with ASR-1000-ESP40, ASR-1000-SIP40, ASR-1000-RP2 , and with SPA-1X10GE-L-V2 that should hold an XFP-10G-MM-SR.   i am in the proceed of an implementation and configuration, but i am facing a problem on the interfaces, where i am no
Cisco WAN ::  How To Available License On ASR 1006 / 9000 Series

Cisco WAN :: How To Available License On ASR 1006 / 9000 Series

We have ASR 1006 with IOS XE and i want to see the Software License but somehow i cant!!!   ...i googled it but i could not find anything.how can i see the available license on ASR 1006 or 9000 series?
Cisco ASR 1000 Router

Cisco ASR 1000 Router

I'm buying Cisco ASR 1000 router that should handle 2 Gbps bandwidth. Please advice on components, models, etc. I have a vendor, but I'll appreciate any reference, based on your experience, on where to buy one at reasonable price. I think I can proba
Cisco :: ASR 1013 - Command Of Rate Limit On A Sub Interface

Cisco :: ASR 1013 - Command Of Rate Limit On A Sub Interface

I am looking for the command of rate-limit on a sub-interface in cisco asr 1013.   Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-ADVENTERPRISEK9-M), Version 15.2(2)S, RELEASE SOFTWARE (fc1) IOS XE Version: 03.06.00.S If it is possible in Cis
Cisco WAN :: Creating Vlan On ASR 1006?

Cisco WAN :: Creating Vlan On ASR 1006?

New to Cisco devices and have had an ASR dropped in my lap.Running ASR1000-RP2 with System image file: asr1000rp2-advipservicesk9.03.03.00.S.151-2.S.bin Show Vlans returns: No Virtual LANs configured Router(config)#interface vlan?   <1-4095>   Vlan
Cisco WAN :: ASR 1006 RP2 - Change Upstream Provider Without Losing BGP Connection

Cisco WAN :: ASR 1006 RP2 - Change Upstream Provider Without Losing BGP Connection

We are connected to 2 different providers (PROV01 and PROV02) with eBGP full internet tables. PROV01 routes have higher local preference over PROV02.   We are having problems with our provider and would like your expertise. PROV01, higher preference
Cisco WAN :: How To Upgrade Single RP ASR 1006

Cisco WAN :: How To Upgrade Single RP ASR 1006

We are trying to upgrade our ASR1006 with single RP. We got an Warning message as "superpackage install over superpackage not allowed on active RP"   how to do the upgrade properly?
Cisco Switching/Routing :: Spanning-tree Between 4507 And Extreme Switch

Cisco Switching/Routing :: Spanning-tree Between 4507 And Extreme Switch

We will be connecting Cisco 4507 with Extreme Switches. We ran into spanning-tree issues last time. Extreme does not understand spanning-tree. So what i am thinking it to prevent bpdu advertisement from 4507 to extreme switches and also prevent incom
Cisco Switching/Routing :: Spanning Tree Between A Nexus 5020 And Catalyst 6509

Cisco Switching/Routing :: Spanning Tree Between A Nexus 5020 And Catalyst 6509

Our customer is willing to have a Cisco Nexus 5020 to provide server connectivity and this Nexus would go connected to their core switch 6509. They are concern about Spanning tree compatibility between the Nexus and the 6509. Are they fully compatibl
Cisco Switching/Routing :: SPAN Configuration In Catalyst 3750

Cisco Switching/Routing :: SPAN Configuration In Catalyst 3750

I have CISCO catalyst with VLANs (VLAN ID 33, 36, 40-53) configured. I need to configure port mirroring in Switch 3750 for NAC (Network Access Control).  I need to Monitor all the VLANs. Here is the SPAN configuration of switch: [code] Monitor sessio
Cisco Switching/Routing :: Spanned Etherchannel ASA 5585X And Avaya VSP9000?

Cisco Switching/Routing :: Spanned Etherchannel ASA 5585X And Avaya VSP9000?

We have a pair of ASA 5585X firewalls that need to connect to a pair of Avaya VSP9000 switches.  The Cisco docs refer to doing spanned etherchannel with a Cat 6500 switch using VSS or a Nexus switch using VPC.  Does spanned etherchannel work with non
Cisco WAN :: 871 SPAN Want To Monitor The Wan Port Using Span

Cisco WAN :: 871 SPAN Want To Monitor The Wan Port Using Span

I am having some problems creating a SPAN port on my Cisco 871 (running IOS 12.4-11T).  My 871 is connected to a DSL modem, and uses "IP Negotiated" to get its dynamic ip address.I want to monitor the WAN port (FastEthernet4) using SPAN, but whe